{"title":"Elkhart Plastics Tanks","description":"\u003cp\u003eElkhart Plastics rotomolded polyethylene tanks, including vertical water storage tanks, vertical chemical storage tanks and utility tanks. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e","products":[{"product_id":"50-gallon-elkhart-plastics-flat-bottom-utility-storage-tank-1-7-sg-mpn-107049a03","title":"50 Gallon Elkhart Plastics Flat Bottom Utility Storage Tank 1.7 SG (MPN 107049A03)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 50 Gallon Flat Bottom Utility Storage Tank 1.7 SG (MPN 107049A03) is a rotomolded, flat bottom polyethylene utility tank for storing and hauling water and non-flammable liquids, including sprayer use in lawn care, recreation and agriculture. It is rated for 1.7 specific gravity (14.2 lb\/gal). The tank measures 38\" long, 19\" wide and 22.375\" tall, weighs 31 lb and is molded in natural, a translucent finish with molded-in gallon and liter markings so you can see the liquid level.\u003c\/p\u003e\n\u003cp\u003eThe flat bottom sits securely in truck beds and trailers, and the ribbed body makes it easy to strap down. It has a large 6\" fill cap with a built-in vent, a 2\" NPS port and a Santoprene lid gasket, plus a 3\/4\" NPT outlet\/drain with an EPDM gasket and molded-in hand holds. UV inhibitors protect it for indoor and outdoor use. Made in the USA by Elkhart Plastics, a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 50 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.7 SG (14.2 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat bottom:\u003c\/strong\u003e installs easily in trucks and trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge 6\" fill cap:\u003c\/strong\u003e with built-in vent and 2\" NPS port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\" NPT outlet:\u003c\/strong\u003e for easy dispensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranslucent tank:\u003c\/strong\u003e molded-in gallon and liter markings show the liquid level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRibbed body and molded-in hand holds:\u003c\/strong\u003e for secure strapping and handling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotomolded and UV-inhibited:\u003c\/strong\u003e impact-resistant for indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 107049A03 (Natural)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 50 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); EPDM fitting gasket; Santoprene lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.7 SG (14.2 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Natural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Flat bottom utility storage tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 38\" L x 19\" W x 22.375\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 31 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e 6\" lid with 2\" NPS port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain:\u003c\/strong\u003e 0.75\" NPT (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Atlantic, IA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWater and non-flammable liquid storage and transport\u003c\/li\u003e\n\u003cli\u003eSprayer tank for lawn care\u003c\/li\u003e\n\u003cli\u003eRecreation\u003c\/li\u003e\n\u003cli\u003eAgriculture\u003c\/li\u003e\n\u003cli\u003eTruck bed and trailer mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE). The lid gasket is Santoprene and the fitting gasket is EPDM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.7 specific gravity (14.2 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 38\" long, 19\" wide and 22.375\" tall and weighs 31 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eStoring and hauling water and non-flammable liquids, including as a sprayer tank for lawn care, recreation and agriculture. The flat bottom fits truck beds and trailers. Liquids cannot exceed 1.7 specific gravity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The fill cap has a built-in vent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Atlantic, IA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 107049A03.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.amazon.com\/dp\/B0FFBQPZWV\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics 50 Gallon Utility Tank (107049A03), Elkhart Plastics brand store listing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e IA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Natural","offer_id":53280347062584,"sku":"107049A03","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/61usIUw1uAL._AC_SL1500.jpg?v=1792081102"},{"product_id":"1000-gallon-elkhart-plastics-vertical-water-storage-tank-1-0-sg-mpn-307065a00","title":"1000 Gallon Elkhart Plastics Vertical Water Storage Tank 1.0 SG (MPN 307065A00)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 1000 Gallon Vertical Water Storage Tank 1.0 SG (MPN 307065A00) is a rotomolded, one-piece vertical tank molded from UV-stabilized high-density polyethylene (HDPE) for water-only storage. It is rated for 1.0 specific gravity (8.3 lb\/gal), the weight of water, and is not rated for chemicals or fertilizers. The tank measures 64\" in diameter and 79\" tall, weighs 178 lb and is molded in black, which blocks light from entering the tank to help resist algae growth. In this size Elkhart Plastics also makes the 1000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107065A01) and the 1000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307065A01) for heavier liquids.\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics vertical water tanks are built with more connection points, an air bleed for maximum fill and a tough tank top. Each comes standard with two 16\" manway lids, a 1-1\/2\" female NPT bulkhead inlet fitting at the top and a 2\" female NPT bulkhead outlet fitting at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal), water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotomolded, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir bleed:\u003c\/strong\u003e maximizes fill and shortens fill time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 16\" manway lids:\u003c\/strong\u003e flexibility for top-down plumbing, filtered catchment and access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop inlet fitting:\u003c\/strong\u003e set at the highest point for optimized fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom outlet fitting:\u003c\/strong\u003e set at the lowest point for maximum drainage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGallon indicators:\u003c\/strong\u003e molded-in volume markers for easy inventory checks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack, algae-resistant design:\u003c\/strong\u003e blocks light from entering the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307065A00 (Black)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 64\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 79\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 178 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e Two 16\" manway lids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 1-1\/2\" female threaded NPT bulkhead fitting (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Atlantic, IA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePotable water storage\u003c\/li\u003e\n\u003cli\u003eBulk water storage\u003c\/li\u003e\n\u003cli\u003eRainwater collection and harvesting\u003c\/li\u003e\n\u003cli\u003eWell water storage\u003c\/li\u003e\n\u003cli\u003eFire suppression water supply\u003c\/li\u003e\n\u003cli\u003eAgriculture, irrigation and livestock watering\u003c\/li\u003e\n\u003cli\u003eIndustrial water systems and manufacturing processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards. The fittings are polypropylene with EPDM gaskets. Polyethylene does not contain BPA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.0 specific gravity (8.3 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal). This is a water-only tank: Elkhart Plastics does not rate its 1.0 SG tanks for chemicals, fertilizers or anything other than clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 64\" in diameter and 79\" tall and weighs 178 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003ePotable water, bulk water, rainwater collection, well water, fire suppression water, irrigation, livestock watering and industrial water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 1000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107065A01) and the 1000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307065A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Atlantic, IA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307065A00.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/water-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Water Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-water-tanks-brochures\/\" target=\"_blank\" rel=\"noopener\"\u003eVertical Water Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e IA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Black","offer_id":53280347160888,"sku":"307065A00","price":1137.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-water-2500_2849800f-0cd3-4fd6-8780-ff8d7de446f4.png?v=1792082841"},{"product_id":"1000-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-5-sg-mpn-107065a01","title":"1000 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.5 SG (MPN 107065A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 1000 Gallon Vertical Chemical Storage Tank 1.5 SG (MPN 107065A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.5 specific gravity (12.5 lb\/gal), so it can hold liquids up to 1.5 times the weight of water. The tank measures 64\" in diameter and 79\" tall, weighs 183 lb and is molded in natural. In this size Elkhart Plastics also makes the 1000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307065A00) and the 1000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307065A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 107065A01 (Natural)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Natural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 64\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 79\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 183 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Atlantic, IA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.5 specific gravity (12.5 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 64\" in diameter and 79\" tall and weighs 183 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 1000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307065A00) and the 1000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307065A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Atlantic, IA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 107065A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e IA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Natural","offer_id":53280347324728,"sku":"107065A01","price":1160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical-top-1_81c569a7-e64e-4cf7-a70b-4f8fce495d12.png?v=1792082854"},{"product_id":"1000-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-9-sg-mpn-307065a01","title":"1000 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.9 SG (MPN 307065A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 1000 Gallon Vertical Chemical Storage Tank 1.9 SG (MPN 307065A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.9 specific gravity (15.8 lb\/gal), so it can hold liquids up to 1.9 times the weight of water. The tank measures 64\" in diameter and 79\" tall, weighs 190 lb and is molded in light blue. In this size Elkhart Plastics also makes the 1000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307065A00) and the 1000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107065A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307065A01 (Light Blue)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 64\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 79\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 190 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Atlantic, IA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.9 specific gravity (15.8 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 64\" in diameter and 79\" tall and weighs 190 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 1000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307065A00) and the 1000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107065A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Atlantic, IA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307065A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e IA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Light Blue","offer_id":53280347390264,"sku":"307065A01","price":1341.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical_45147a7c-24de-437a-9dd8-a3530d4a1ca7.webp?v=1792082859"},{"product_id":"1500-gallon-elkhart-plastics-vertical-water-storage-tank-1-0-sg-mpn-307066a00","title":"1500 Gallon Elkhart Plastics Vertical Water Storage Tank 1.0 SG (MPN 307066A00)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 1500 Gallon Vertical Water Storage Tank 1.0 SG (MPN 307066A00) is a rotomolded, one-piece vertical tank molded from UV-stabilized high-density polyethylene (HDPE) for water-only storage. It is rated for 1.0 specific gravity (8.3 lb\/gal), the weight of water, and is not rated for chemicals or fertilizers. The tank measures 72\" in diameter and 94\" tall, weighs 240 lb and is molded in black, which blocks light from entering the tank to help resist algae growth. In this size Elkhart Plastics also makes the 1500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107066A01) and the 1500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307066A01) for heavier liquids.\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics vertical water tanks are built with more connection points, an air bleed for maximum fill and a tough tank top. Each comes standard with two 16\" manway lids, a 1-1\/2\" female NPT bulkhead inlet fitting at the top and a 2\" female NPT bulkhead outlet fitting at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal), water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotomolded, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir bleed:\u003c\/strong\u003e maximizes fill and shortens fill time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 16\" manway lids:\u003c\/strong\u003e flexibility for top-down plumbing, filtered catchment and access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop inlet fitting:\u003c\/strong\u003e set at the highest point for optimized fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom outlet fitting:\u003c\/strong\u003e set at the lowest point for maximum drainage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGallon indicators:\u003c\/strong\u003e molded-in volume markers for easy inventory checks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack, algae-resistant design:\u003c\/strong\u003e blocks light from entering the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307066A00 (Black)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 72\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 94\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 240 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e Two 16\" manway lids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 1-1\/2\" female threaded NPT bulkhead fitting (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Ridgefield, WA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePotable water storage\u003c\/li\u003e\n\u003cli\u003eBulk water storage\u003c\/li\u003e\n\u003cli\u003eRainwater collection and harvesting\u003c\/li\u003e\n\u003cli\u003eWell water storage\u003c\/li\u003e\n\u003cli\u003eFire suppression water supply\u003c\/li\u003e\n\u003cli\u003eAgriculture, irrigation and livestock watering\u003c\/li\u003e\n\u003cli\u003eIndustrial water systems and manufacturing processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards. The fittings are polypropylene with EPDM gaskets. Polyethylene does not contain BPA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.0 specific gravity (8.3 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal). This is a water-only tank: Elkhart Plastics does not rate its 1.0 SG tanks for chemicals, fertilizers or anything other than clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 72\" in diameter and 94\" tall and weighs 240 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003ePotable water, bulk water, rainwater collection, well water, fire suppression water, irrigation, livestock watering and industrial water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 1500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107066A01) and the 1500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307066A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Ridgefield, WA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307066A00.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/water-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Water Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-water-tanks-brochures\/\" target=\"_blank\" rel=\"noopener\"\u003eVertical Water Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e WA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Black","offer_id":53280347455800,"sku":"307066A00","price":1340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-water-2500_d432a685-e571-4e5e-946a-03054932aa71.png?v=1792082867"},{"product_id":"1500-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-5-sg-mpn-107066a01","title":"1500 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.5 SG (MPN 107066A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 1500 Gallon Vertical Chemical Storage Tank 1.5 SG (MPN 107066A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.5 specific gravity (12.5 lb\/gal), so it can hold liquids up to 1.5 times the weight of water. The tank measures 72\" in diameter and 94\" tall, weighs 275 lb and is molded in natural. In this size Elkhart Plastics also makes the 1500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307066A00) and the 1500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307066A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 107066A01 (Natural)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Natural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 72\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 94\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 275 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Ridgefield, WA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.5 specific gravity (12.5 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 72\" in diameter and 94\" tall and weighs 275 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 1500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307066A00) and the 1500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307066A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Ridgefield, WA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 107066A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e WA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Natural","offer_id":53280347554104,"sku":"107066A01","price":1415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical-top-1_16c08719-7657-4b41-9b83-0ad0051112f4.png?v=1792082882"},{"product_id":"1500-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-9-sg-mpn-307066a01","title":"1500 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.9 SG (MPN 307066A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 1500 Gallon Vertical Chemical Storage Tank 1.9 SG (MPN 307066A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.9 specific gravity (15.8 lb\/gal), so it can hold liquids up to 1.9 times the weight of water. The tank measures 72\" in diameter and 94\" tall, weighs 347 lb and is molded in light blue. In this size Elkhart Plastics also makes the 1500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307066A00) and the 1500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107066A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307066A01 (Light Blue)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 1500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 72\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 94\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 347 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Ridgefield, WA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.9 specific gravity (15.8 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 72\" in diameter and 94\" tall and weighs 347 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 1500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307066A00) and the 1500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107066A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Ridgefield, WA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307066A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e WA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Light Blue","offer_id":53280347619640,"sku":"307066A01","price":1841.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical_272ace47-8293-4059-bbed-5a610bf14d6a.webp?v=1792082887"},{"product_id":"2500-gallon-elkhart-plastics-vertical-water-storage-tank-1-0-sg-mpn-307067a00","title":"2500 Gallon Elkhart Plastics Vertical Water Storage Tank 1.0 SG (MPN 307067A00)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 2500 Gallon Vertical Water Storage Tank 1.0 SG (MPN 307067A00) is a rotomolded, one-piece vertical tank molded from UV-stabilized high-density polyethylene (HDPE) for water-only storage. It is rated for 1.0 specific gravity (8.3 lb\/gal), the weight of water, and is not rated for chemicals or fertilizers. The tank measures 95\" in diameter and 92\" tall, weighs 336 lb and is molded in black, which blocks light from entering the tank to help resist algae growth. In this size Elkhart Plastics also makes the 2500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107067A01) and the 2500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307067A01) for heavier liquids.\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics vertical water tanks are built with more connection points, an air bleed for maximum fill and a tough tank top. Each comes standard with two 16\" manway lids, a 1-1\/2\" female NPT bulkhead inlet fitting at the top and a 2\" female NPT bulkhead outlet fitting at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal), water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotomolded, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir bleed:\u003c\/strong\u003e maximizes fill and shortens fill time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 16\" manway lids:\u003c\/strong\u003e flexibility for top-down plumbing, filtered catchment and access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop inlet fitting:\u003c\/strong\u003e set at the highest point for optimized fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom outlet fitting:\u003c\/strong\u003e set at the lowest point for maximum drainage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGallon indicators:\u003c\/strong\u003e molded-in volume markers for easy inventory checks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack, algae-resistant design:\u003c\/strong\u003e blocks light from entering the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307067A00 (Black)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 95\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 92\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 336 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e Two 16\" manway lids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 1-1\/2\" female threaded NPT bulkhead fitting (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Atlantic, IA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePotable water storage\u003c\/li\u003e\n\u003cli\u003eBulk water storage\u003c\/li\u003e\n\u003cli\u003eRainwater collection and harvesting\u003c\/li\u003e\n\u003cli\u003eWell water storage\u003c\/li\u003e\n\u003cli\u003eFire suppression water supply\u003c\/li\u003e\n\u003cli\u003eAgriculture, irrigation and livestock watering\u003c\/li\u003e\n\u003cli\u003eIndustrial water systems and manufacturing processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards. The fittings are polypropylene with EPDM gaskets. Polyethylene does not contain BPA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.0 specific gravity (8.3 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal). This is a water-only tank: Elkhart Plastics does not rate its 1.0 SG tanks for chemicals, fertilizers or anything other than clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 95\" in diameter and 92\" tall and weighs 336 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003ePotable water, bulk water, rainwater collection, well water, fire suppression water, irrigation, livestock watering and industrial water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 2500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107067A01) and the 2500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307067A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Atlantic, IA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307067A00.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/water-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Water Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-water-tanks-brochures\/\" target=\"_blank\" rel=\"noopener\"\u003eVertical Water Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e IA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Black","offer_id":53280347717944,"sku":"307067A00","price":1570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-water-2500_54cf77d6-101d-4614-8e87-e5948025d836.png?v=1792082894"},{"product_id":"2500-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-5-sg-mpn-107067a01","title":"2500 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.5 SG (MPN 107067A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 2500 Gallon Vertical Chemical Storage Tank 1.5 SG (MPN 107067A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.5 specific gravity (12.5 lb\/gal), so it can hold liquids up to 1.5 times the weight of water. The tank measures 95\" in diameter and 92\" tall, weighs 476 lb and is molded in natural. In this size Elkhart Plastics also makes the 2500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307067A00) and the 2500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307067A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 107067A01 (Natural)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Natural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 95\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 92\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 476 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Atlantic, IA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.5 specific gravity (12.5 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 95\" in diameter and 92\" tall and weighs 476 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 2500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307067A00) and the 2500 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307067A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Atlantic, IA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 107067A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e IA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Natural","offer_id":53280347816248,"sku":"107067A01","price":1975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical-top-1_164ddaa8-559e-44e8-b279-60cea859a9b3.png?v=1792082898"},{"product_id":"2500-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-9-sg-mpn-307067a01","title":"2500 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.9 SG (MPN 307067A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 2500 Gallon Vertical Chemical Storage Tank 1.9 SG (MPN 307067A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.9 specific gravity (15.8 lb\/gal), so it can hold liquids up to 1.9 times the weight of water. The tank measures 95\" in diameter and 92\" tall, weighs 602 lb and is molded in light blue. In this size Elkhart Plastics also makes the 2500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307067A00) and the 2500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107067A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307067A01 (Light Blue)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2500 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 95\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 92\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 602 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Atlantic, IA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.9 specific gravity (15.8 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 95\" in diameter and 92\" tall and weighs 602 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 2500 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307067A00) and the 2500 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107067A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Atlantic, IA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307067A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e IA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Light Blue","offer_id":53280347881784,"sku":"307067A01","price":2652.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical_ffa81a49-004f-46bd-be07-f24ec03f47e6.webp?v=1792082903"},{"product_id":"3000-gallon-elkhart-plastics-vertical-water-storage-tank-1-0-sg-mpn-307068a00","title":"3000 Gallon Elkhart Plastics Vertical Water Storage Tank 1.0 SG (MPN 307068A00)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 3000 Gallon Vertical Water Storage Tank 1.0 SG (MPN 307068A00) is a rotomolded, one-piece vertical tank molded from UV-stabilized high-density polyethylene (HDPE) for water-only storage. It is rated for 1.0 specific gravity (8.3 lb\/gal), the weight of water, and is not rated for chemicals or fertilizers. The tank measures 95\" in diameter and 109\" tall, weighs 460 lb and is molded in black, which blocks light from entering the tank to help resist algae growth. In this size Elkhart Plastics also makes the 3000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107068A01) and the 3000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307068A01) for heavier liquids.\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics vertical water tanks are built with more connection points, an air bleed for maximum fill and a tough tank top. Each comes standard with two 16\" manway lids, a 1-1\/2\" female NPT bulkhead inlet fitting at the top and a 2\" female NPT bulkhead outlet fitting at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal), water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotomolded, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir bleed:\u003c\/strong\u003e maximizes fill and shortens fill time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 16\" manway lids:\u003c\/strong\u003e flexibility for top-down plumbing, filtered catchment and access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop inlet fitting:\u003c\/strong\u003e set at the highest point for optimized fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom outlet fitting:\u003c\/strong\u003e set at the lowest point for maximum drainage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGallon indicators:\u003c\/strong\u003e molded-in volume markers for easy inventory checks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack, algae-resistant design:\u003c\/strong\u003e blocks light from entering the tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307068A00 (Black)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.0 SG (8.3 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Water only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 95\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 109\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 460 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e Two 16\" manway lids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 1-1\/2\" female threaded NPT bulkhead fitting (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Ridgefield, WA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePotable water storage\u003c\/li\u003e\n\u003cli\u003eBulk water storage\u003c\/li\u003e\n\u003cli\u003eRainwater collection and harvesting\u003c\/li\u003e\n\u003cli\u003eWell water storage\u003c\/li\u003e\n\u003cli\u003eFire suppression water supply\u003c\/li\u003e\n\u003cli\u003eAgriculture, irrigation and livestock watering\u003c\/li\u003e\n\u003cli\u003eIndustrial water systems and manufacturing processes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) compliant with FDA Regulation 177.1520 and NSF\/ANSI 61 standards. The fittings are polypropylene with EPDM gaskets. Polyethylene does not contain BPA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.0 specific gravity (8.3 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal). This is a water-only tank: Elkhart Plastics does not rate its 1.0 SG tanks for chemicals, fertilizers or anything other than clean water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 95\" in diameter and 109\" tall and weighs 460 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003ePotable water, bulk water, rainwater collection, well water, fire suppression water, irrigation, livestock watering and industrial water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 3000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107068A01) and the 3000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307068A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Ridgefield, WA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307068A00.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/water-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Water Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-water-tanks-brochures\/\" target=\"_blank\" rel=\"noopener\"\u003eVertical Water Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e WA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Black","offer_id":53280348012856,"sku":"307068A00","price":1817.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-water-2500_70e26738-2ef6-4929-9d43-12510048f37d.png?v=1792082909"},{"product_id":"3000-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-5-sg-mpn-107068a01","title":"3000 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.5 SG (MPN 107068A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 3000 Gallon Vertical Chemical Storage Tank 1.5 SG (MPN 107068A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.5 specific gravity (12.5 lb\/gal), so it can hold liquids up to 1.5 times the weight of water. The tank measures 95\" in diameter and 109\" tall, weighs 625 lb and is molded in natural. In this size Elkhart Plastics also makes the 3000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307068A00) and the 3000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307068A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 107068A01 (Natural)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.5 SG (12.5 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Natural\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 95\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 109\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 625 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Ridgefield, WA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.5 specific gravity (12.5 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 95\" in diameter and 109\" tall and weighs 625 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 3000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307068A00) and the 3000 Gallon Vertical Chemical Storage Tank 1.9 SG in light blue (MPN 307068A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Ridgefield, WA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 107068A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e WA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Natural","offer_id":53280348111160,"sku":"107068A01","price":2407.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical-top-1_829f5fed-92aa-435f-9283-48d5659eec45.png?v=1792082913"},{"product_id":"3000-gallon-elkhart-plastics-vertical-chemical-storage-tank-1-9-sg-mpn-307068a01","title":"3000 Gallon Elkhart Plastics Vertical Chemical Storage Tank 1.9 SG (MPN 307068A01)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe Elkhart Plastics 3000 Gallon Vertical Chemical Storage Tank 1.9 SG (MPN 307068A01) is a seamless, one-piece rotomolded vertical tank molded from high-density polyethylene (HDPE) for chemical and liquid storage. It is rated for 1.9 specific gravity (15.8 lb\/gal), so it can hold liquids up to 1.9 times the weight of water. The tank measures 95\" in diameter and 109\" tall, weighs 820 lb and is molded in light blue. In this size Elkhart Plastics also makes the 3000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307068A00) and the 3000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107068A01).\u003c\/p\u003e\n\u003cp\u003eElkhart Plastics Industrial Chemical Tanks are built to ANSI 61 wall thickness standards with a tough tank top and are offered in multiple specific gravity ratings for agriculture, industrial and residential applications. This tank comes with one 16\" manway lid with gasket, a 2\" female NPT bulkhead inlet fitting with threaded plug at the top and a 3\" female NPT bulkhead outlet\/drain fitting with threaded plug at the bottom. Elkhart Plastics is a Myers Industries company.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e HDPE built with FDA-compliant materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless, one-piece construction:\u003c\/strong\u003e no seams or welds, which means no weak points and less risk of leaks or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough tank top:\u003c\/strong\u003e large radii and increased wall thickness prevent collapsing in the sun\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI 61 wall thickness standards:\u003c\/strong\u003e built to full specification for strength and reliability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugged fittings:\u003c\/strong\u003e 2\" top inlet and 3\" bottom outlet\/drain, both with threaded plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasketed 16\" manway lid:\u003c\/strong\u003e one 16\" manway with lid gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-stabilized resin:\u003c\/strong\u003e Elkhart Plastics standard UV rating of 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 307068A01 (Light Blue)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3000 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-density polyethylene (HDPE); polypropylene (PP) fittings; EPDM fitting gaskets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific gravity:\u003c\/strong\u003e 1.9 SG (15.8 lb\/gal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Light Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Liquids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 95\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 109\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 820 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid:\u003c\/strong\u003e One 16\" manway lid with gasket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet (side\/top):\u003c\/strong\u003e 2\" female threaded NPT bulkhead fitting with threaded plug (side\/top)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet\/drain (side\/bottom):\u003c\/strong\u003e 3\" female threaded NPT bulkhead fitting with threaded plug (side\/bottom)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid gasket:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e Up to 140°F (60°C) intermittent; 120°F (49°C) sustained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Elkhart Plastics (a Myers Industries company)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips from:\u003c\/strong\u003e Ridgefield, WA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLiquid chemical storage\u003c\/li\u003e\n\u003cli\u003eFertilizer storage\u003c\/li\u003e\n\u003cli\u003eAgriculture, industrial and residential liquid storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat is it made of?\u003c\/strong\u003e\u003cbr\u003eThe tank is molded from high-density polyethylene (HDPE) built with FDA-compliant materials. The fittings are polypropylene with EPDM gaskets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat specific gravity is it rated for?\u003c\/strong\u003e\u003cbr\u003eIt is rated for 1.9 specific gravity (15.8 lb\/gal). Water is 1.0 specific gravity (8.3 lb\/gal).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003eIt measures 95\" in diameter and 109\" tall and weighs 820 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich chemicals can I store in it?\u003c\/strong\u003e\u003cbr\u003eThe buyer is responsible for confirming the chemical is compatible with the HDPE tank, the polypropylene fittings and the EPDM gaskets at the expected storage temperature. Check the chemical resistance chart in the Elkhart Plastics Technical Guide (linked below), or contact Tank Supply Direct before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can I use it for?\u003c\/strong\u003e\u003cbr\u003eLiquid chemicals and fertilizers in agriculture, industrial and residential applications, within its specific gravity and chemical compatibility limits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat temperature can it handle?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics rates its tanks for intermittent temperatures up to 140°F (60°C) and sustained temperatures up to 120°F (49°C). Service temperatures above that lower the tank's specific gravity rating. Deionized water can be stored at up to 100°F (38°C).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be buried or pressurized?\u003c\/strong\u003e\u003cbr\u003eNo. Elkhart Plastics liquid tanks are not engineered for burial and cannot be pressurized or put under vacuum. The tank must be vented for filling and emptying.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it need to sit on?\u003c\/strong\u003e\u003cbr\u003eA level, well-drained site that fully supports the tank bottom. Elkhart Plastics recommends reinforced concrete support pads for tanks over 1,000 gallons, and anchoring to your site's seismic and wind requirements. Vertical bulk storage tanks are for stationary use only, not transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat other versions come in this size?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics also makes the 3000 Gallon Vertical Water Storage Tank 1.0 SG in black (MPN 307068A00) and the 3000 Gallon Vertical Chemical Storage Tank 1.5 SG in natural (MPN 107068A01).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does it take to ship, and where does it ship from?\u003c\/strong\u003e\u003cbr\u003eLead time is 3-4 weeks, depending on inventory and volume. It ships from Ridgefield, WA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho makes it?\u003c\/strong\u003e\u003cbr\u003eElkhart Plastics, a Myers Industries company. Manufacturer part number 307068A01.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/products\/vertical-storage-tanks\/chemical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eElkhart Plastics Vertical Chemical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/industrial-chemical-tanks-brochure\/\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Chemical Tanks Brochure\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/technical-guide-faqs-water-and-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Guide \u0026amp; FAQs - Water and Liquid Tanks (includes the HDPE chemical resistance chart)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/application-guide-water-liquid-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eApplication Guide - Water and Liquid Tanks (handling, installation and use)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/epi-roto.com\/download\/limited-warranty-for-proprietary-vertical-storage-tanks\/\" target=\"_blank\" rel=\"noopener\"\u003eLimited Warranty for Vertical Storage Tanks\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e 3-4 weeks, depending on inventory and volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e WA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eElkhart Plastics warrants its vertical storage tanks against defects in material and workmanship for \u003cb\u003e5 years\u003c\/b\u003e from the original purchase date, extended to \u003cb\u003e10 years\u003c\/b\u003e when the original purchaser or end user registers the tank with Elkhart Plastics within 30 days of purchase. Fittings, gaskets and accessories installed by Elkhart Plastics are warranted for 1 year. Coverage is limited to repair, replacement or a pro-rated credit, and requires storing suitable liquids within the tank's specific gravity rating; see the full Limited Warranty above. To register your tank or start a claim, contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"Elkhart Plastics","offers":[{"title":"Light Blue","offer_id":53280348209464,"sku":"307068A01","price":3341.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/Elkhart-Vertical-storage-tanks-chemical_bd833865-be03-4c05-bfff-1632a2ae05f1.webp?v=1792082918"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/collections\/Elkhart-Plastics-collection-banner_1.png?v=1792083822","url":"https:\/\/www.tanksupplydirect.com\/collections\/elkhart-plastics-tanks.oembed","provider":"Tank Supply Direct","version":"1.0","type":"link"}