{"title":"Air-Operated Double Diaphragm Pumps","description":"\u003cp\u003eAir-operated double diaphragm (AODD) pumps move liquids with compressed air instead of an electric motor, so they are a common choice for transferring fuel, oil, water, chemicals and solids-laden fluids. This collection carries 63 NOMAD AODD pumps from 1\/4\" to 4\" with rated flows from 4.4 to 275 gpm, in aluminum, polypropylene, conductive polypropylene and ductile iron, with Buna-N, PTFE, Santoprene, Neoprene and polyurethane elastomers.\u003c\/p\u003e\u003ch2\u003eHow to choose a diaphragm pump\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize and flow:\u003c\/strong\u003e match the port size to your piping and pick a pump whose maximum flow comfortably exceeds your target - real flow drops with discharge pressure, suction lift and viscosity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted material:\u003c\/strong\u003e aluminum is commonly used for oils, fuels, lubricants and water-based fluids; polypropylene for many acids, caustics and water-treatment chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastomer:\u003c\/strong\u003e Buna-N for petroleum fluids and water, PTFE for aggressive chemicals and solvents, Santoprene and Neoprene for water, mild chemicals and abrasion. Always confirm compatibility with your fluid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Pwr-Flo for indoor plant service on clean, filtered air; Trans-Flo for rugged outdoor work and lower-quality air.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eShop by series:\u003c\/strong\u003e \u003ca href=\"\/collections\/nomad-pwr-flo-diaphragm-pumps\"\u003eNOMAD Pwr-Flo\u003c\/a\u003e · \u003ca href=\"\/collections\/nomad-trans-flo-diaphragm-pumps\"\u003eNOMAD Trans-Flo\u003c\/a\u003e · \u003ca href=\"\/collections\/nomad-quali-flo-diaphragm-pumps\"\u003eNOMAD Quali-Flo\u003c\/a\u003e · \u003ca href=\"\/collections\/nomad-opta-flo-diaphragm-pumps\"\u003eNOMAD Opta-Flo\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003eShop by material:\u003c\/strong\u003e \u003ca href=\"\/collections\/metallic-diaphragm-pumps\"\u003eMetallic (aluminum, ductile iron)\u003c\/a\u003e · \u003ca href=\"\/collections\/non-metallic-diaphragm-pumps\"\u003eNon-metallic (polypropylene)\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard builds, ready to ship:\u003c\/strong\u003e each pump is listed in a standard NOMAD configuration that ships from Nevada in approximately 4 days. Other wetted materials, elastomers, port connections and ATEX versions are available - call or email Tank Supply Direct for a quote.\u003c\/p\u003e\u003ch2\u003eCommon questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow does an air-operated double diaphragm pump work?\u003c\/strong\u003e\u003cbr\u003eCompressed air shifts an air valve that drives two diaphragms back and forth. As one diaphragm pulls fluid in through the inlet check valves, the other pushes fluid out the discharge. Flow and pressure follow the air supply, so you control the pump with an air regulator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat size diaphragm pump do I need?\u003c\/strong\u003e\u003cbr\u003eStart with your pipe size and target flow, then check the NOMAD performance curve on each product page. Each listing shows the maximum flow, air inlet size, maximum air pressure and solids passage from the NOMAD operation manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I get a different material or port?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD builds many of these models in other configurations, including stainless steel bodies and BSP, Tri-Clamp or flanged ports. Contact Tank Supply Direct for a quote.\u003c\/p\u003e","products":[{"product_id":"nomad-n05-1-2-inch-non-metallic-ptfe-diaphragm-pump","title":"NOMAD Quali-Flo N05 1\/2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump (MPN N05B2P2TPNS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N05 (model N05B2P2TPNS000) is a 1\/2\" (13 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 14 gpm (52 lpm) and passes solids up to 0.125\" (3 mm). This standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build N05B2P2TPNS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N05B2P2TPNS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" NPT or 1\/2\" BSP (tapered)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14 gpm (52 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.125\" (3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.026 gal (0.098 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N05 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N05 is rated up to 14 gpm (52 lpm). Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N05-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N05 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-2-13-mm-non-metallic-ptfe-fitted-air-operated-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102425047352,"sku":"N05B2P2TPNS000","price":950.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N05-Non-Metallic_performance-chart-01.jpg?v=1791498110"},{"product_id":"nomad-n1f-1-inch-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Quali-Flo N1F 1\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN N1FB3P2PPUS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N1F (model N1FB3P2PPUS000) is a 1\" (25 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 53 gpm (200 lpm), runs on up to 100 psi (7 bar) of compressed air and passes solids up to 0.25\" (6 mm). This bolted standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build N1FB3P2PPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N1FB3P2PPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" ANSI flange or PN10 25 mm DIN flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 53 gpm (200 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psi (7 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.25\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.19 gal (0.72 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 42 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N1F pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N1F is rated up to 53 gpm (200 lpm) at a maximum 100 psi (7 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air; do not exceed 100 psi (7 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N1F-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N1F operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-25-mm-non-metallic-pte-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102425604408,"sku":"N1FB3P2PPUS000","price":1503.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N1F-Non-Metallic_performance-chart-01.jpg?v=1791498189"},{"product_id":"nomad-n05-1-2-inch-non-metallic-rubber-diaphragm-pump","title":"NOMAD Quali-Flo N05 1\/2\" Polypropylene Santoprene-Fitted Air-Operated Double Diaphragm Pump (MPN N05B2P1TPNS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N05 (model N05B2P1TPNS000) is a 1\/2\" (13 mm) polypropylene, Santoprene-fitted air-operated double diaphragm (AODD) pump that moves up to 14 gpm (52 lpm) and passes solids up to 0.125\" (3 mm). This standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Santoprene diaphragms\u003c\/strong\u003e - standard NOMAD build N05B2P1TPNS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N05B2P1TPNS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" NPT or 1\/2\" BSP (tapered)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14 gpm (52 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.125\" (3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.026 gal (0.098 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Santoprene elastomers, per NOMAD):\u003c\/strong\u003e -40°F to 225°F (-40°C to 107.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 16 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N05 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N05 is rated up to 14 gpm (52 lpm). Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Santoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Santoprene. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N05-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N05 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-2-13-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102422524216,"sku":"N05B2P1TPNS000","price":785.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N05-Non-Metallic_spare-parts-01-scaled_404a77ad-f911-4c4a-a420-f520350ab500.jpg?v=1791498189"},{"product_id":"nomad-n666100-1-inch-metallic-ptfe-diaphragm-pump","title":"NOMAD Opta-Flo N666100 1\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump (MPN N666100-144-C)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Opta-Flo N666100 (model N666100-144-C) is a 1\" (25 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump. This NPT-ported standard build is an Opta-Flo pump used primarily in lube stations and oil field truck applications.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you. Call Tank Supply Direct for performance data on this model.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBolted design with multiple elastomer options\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUsed primarily in lube stations and oil field truck applications\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRetrofittable to the OEM models it replaces (per JDA Global)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build N666100-144-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N666100-144-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Opta-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/opta-flo\/1-25-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102416331064,"sku":"N666100-144-C","price":1031.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N666100.jpg?v=1791498193"},{"product_id":"nomad-n20-2-inch-non-metallic-rubber-diaphragm-pump","title":"NOMAD Quali-Flo N20 2\" Polypropylene Buna-Fitted Air-Operated Double Diaphragm Pump (MPN N20B3PBPPUS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N20 (model N20B3PBPPUS000) is a 2\" (51 mm) polypropylene, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 160 gpm (605 lpm), runs on up to 100 psi (7 bar) of compressed air and passes solids up to 0.66\" (17 mm). This standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N20B3PBPPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N20B3PBPPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" universal flange (fits ANSI \u0026amp; DIN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 160 gpm (605 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psi (7 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.66\" (17 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.46 gal (1.73 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 95 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N20 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N20 is rated up to 160 gpm (605 lpm) at a maximum 100 psi (7 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air; do not exceed 100 psi (7 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N20-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N20 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/2-51-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102419116344,"sku":"N20B3PBPPUS000","price":3222.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N20-Non-Metallic_performance-chart-01.jpg?v=1791498195"},{"product_id":"nomad-n666100-1-inch-metallic-rubber-diaphragm-pump","title":"NOMAD Opta-Flo N666100 1\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump (MPN N666100-122-C)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Opta-Flo N666100 (model N666100-122-C) is a 1\" (25 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump. This NPT-ported standard build is an Opta-Flo pump used primarily in lube stations and oil field truck applications.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you. Call Tank Supply Direct for performance data on this model.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBolted design with multiple elastomer options\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUsed primarily in lube stations and oil field truck applications\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRetrofittable to the OEM models it replaces (per JDA Global)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N666100-122-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N666100-122-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Opta-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/opta-flo\/1-25-mm-metallic-rubber-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102419640632,"sku":"N666100-122-C","price":931.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N666100_cd74dc22-5a90-4360-939d-767ce1da6207.jpg?v=1791498198"},{"product_id":"nomad-nt100-4-inch-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Trans-Flo NT100 4\" Ductile Iron Polyurethane-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 100-512768)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo NT100 (model 100-512768) is a 4\" (102 mm) ductile iron, Polyurethane-fitted air-operated double diaphragm (AODD) pump that moves up to 275 gpm (1041 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1-3\/8\" (35 mm). This clamped, flanged-ported standard build is a Trans-Flo pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eDuctile iron wetted parts give a heavy, rugged metallic pump that is commonly chosen for abrasive slurries, dewatering and other hard-service duty where aluminum would wear faster. Polyurethane offers very high abrasion resistance and is commonly used for abrasive slurries. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuctile Iron wetted parts, Polyurethane diaphragms\u003c\/strong\u003e - standard NOMAD build 100-512768\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 12' dry \/ 30' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 100-512768\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 4\" (102 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" (19 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 275 gpm (1041 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1-3\/8\" (35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 1.22 gal (4.62 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 12' dry \/ 30' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 13.0\" x 37.0\" x 32.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Ductile Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NT100 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NT100 is rated up to 275 gpm (1041 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Polyurethane-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Polyurethane. Polyurethane offers very high abrasion resistance and is commonly used for abrasive slurries. Other elastomers offered for this pump include Buna, Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" (19 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NT100-METALLIC-OP-MANUAL-2022v1-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NT100 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/nt100-4-inch-102-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102417543480,"sku":"100-512768","price":10513.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NT100.jpg?v=1791498207"},{"product_id":"nomad-n20-2-inch-non-metallic-ptfe-diaphragm-pump","title":"NOMAD Quali-Flo N20 2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump (MPN N20B3PGPPUS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N20 (model N20B3PGPPUS000) is a 2\" (51 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 160 gpm (605 lpm), runs on up to 100 psi (7 bar) of compressed air and passes solids up to 0.66\" (17 mm). This standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build N20B3PGPPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N20B3PGPPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" universal flange (fits ANSI \u0026amp; DIN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 160 gpm (605 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psi (7 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.66\" (17 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.46 gal (1.73 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 95 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N20 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N20 is rated up to 160 gpm (605 lpm) at a maximum 100 psi (7 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air; do not exceed 100 psi (7 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N20-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N20 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/2-51-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102420066616,"sku":"N20B3PGPPUS000","price":4296.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N20-Non-Metallic_performance-chart-01_46d2707c-1003-44d3-963d-2fc7408f359d.jpg?v=1791498225"},{"product_id":"nomad-n1f-1-inch-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Quali-Flo N1F 1\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN N1FB1ABWANS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N1F (model N1FB1ABWANS000) is a 1\" (25 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 46 gpm, runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 0.25\" (6 mm). This bolted standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N1FB1ABWANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N1FB1ABWANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" NPT (internal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 46 gpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.25\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.11 gal (0.42 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 25.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N1F pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N1F is rated up to 46 gpm at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" NPT air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N1F-Metallic-Operationl-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N1F operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-25-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted-2\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102422655288,"sku":"N1FB1ABWANS000","price":985.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/QUALIFLO-1-INCH.jpg?v=1791498228"},{"product_id":"nomad-n30-3-inch-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Quali-Flo N30 3\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN N30B1ABBANS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N30 (model N30B1ABBANS000) is a 3\" (76 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 236 gpm (893 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 0.38\" (9.65 mm). This bolted standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N30B1ABBANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N30B1ABBANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 3\" NPT or 3\" BSP tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 236 gpm (893 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.38\" (9.65 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.94 gal (3.56 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 121.3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N30 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N30 is rated up to 236 gpm (893 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" NPT air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N30-Metallic-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N30 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/3-80-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102432452920,"sku":"N30B1ABBANS000","price":2987.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/QUALIFLO-3-INCH.jpg?v=1791498231"},{"product_id":"nomad-n1f-1-inch-non-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Quali-Flo N1F 1\" Polypropylene Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN N1FB3PBPPUS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N1F (model N1FB3PBPPUS000) is a 1\" (25 mm) polypropylene, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 53 gpm (200 lpm), runs on up to 100 psi (7 bar) of compressed air and passes solids up to 0.25\" (6 mm). This bolted standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N1FB3PBPPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N1FB3PBPPUS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" ANSI flange or PN10 25 mm DIN flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 53 gpm (200 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psi (7 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.25\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.19 gal (0.72 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 42 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N1F pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N1F is rated up to 53 gpm (200 lpm) at a maximum 100 psi (7 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include Santoprene.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air; do not exceed 100 psi (7 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N1F-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N1F operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-25-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102422884664,"sku":"N1FB3PBPPUS000","price":1288.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N1F-Non-Metallic_performance-chart-01_82c27509-93b3-438a-8d33-c7d0565c3334.jpg?v=1791498231"},{"product_id":"nomad-npf07-1-4-inch-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF07 1\/4\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 07-1261)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF07 (model 07-1261) is a 1\/4\" (6 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 4.4 gpm (16.7 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/32\" (0.7 mm). This bolted, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 07-1261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 6.2' dry \/ 30.6' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 07-1261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/4\" (6 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 4.4 gpm (16.7 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/32\" (0.7 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.01 gal (0.04 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 6.2' dry \/ 30.6' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 5.0\" x 6.8\" x 6.8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF07 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF07 is rated up to 4.4 gpm (16.7 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/8\" (3 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other port connections (BSP). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF07-POLY-PWR-FLO-QUARTER-INCH-OP-MANUAL-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF07 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf07-1-4-inch-6-4-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102432190776,"sku":"07-1261","price":526.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF07-NON-METALLIC.jpg?v=1791498238"},{"product_id":"nomad-n15-1-1-2-inch-non-metallic-rubber-diaphragm-pump","title":"NOMAD Quali-Flo N15 1-1\/2\" Polypropylene Buna-Fitted Air-Operated Double Diaphragm Pump (MPN N15B3PBPPAS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N15 (model N15B3PBPPAS000) is a 1-1\/2\" (38 mm) polypropylene, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 100 gpm (378 lpm), runs on up to 100 psi (7 bar) of compressed air and passes solids up to 0.47\" (12 mm). This standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N15B3PBPPAS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N15B3PBPPAS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" ANSI flange or PN10 40 mm DIN flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 100 gpm (378 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psi (7 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.47\" (12 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.43 gal (1.63 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 82 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N15 is rated up to 100 gpm (378 lpm) at a maximum 100 psi (7 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air; do not exceed 100 psi (7 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N15-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-1-2-38-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102425178424,"sku":"N15B3PBPPAS000","price":2372.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N15-Non-Metallic_performance-chart-01.jpg?v=1791498247"},{"product_id":"nomad-npf25a-1-inch-non-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF25A 1\" Polypropylene Santoprene-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 25-901269)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF25A (model 25-901269) is a 1\" (25 mm) polypropylene, Santoprene-fitted air-operated double diaphragm (AODD) pump that moves up to 34 gpm (135 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 0.125\" (3.17 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Santoprene diaphragms\u003c\/strong\u003e - standard NOMAD build 25-901269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 10' dry \/ 16' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 25-901269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25.4 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 34 gpm (135 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.125\" (3.17 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 10' dry \/ 16' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Santoprene elastomers, per NOMAD):\u003c\/strong\u003e -40°F to 225°F (-40°C to 107.2°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF25A pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF25A is rated up to 34 gpm (135 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Santoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Santoprene. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Other elastomers offered for this pump include Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF25A-PWR-FLO-1-INCH-OP-MANUAL-POLY-BOLTED-ARO-STYLE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF25A operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf25a-1-inch-25-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102497857848,"sku":"25-901269","price":1210.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF25A.jpg?v=1791498267"},{"product_id":"nomad-npf25a-1-inch-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF25A 1\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 25-901261)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF25A (model 25-901261) is a 1\" (25 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 34 gpm (135 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 0.125\" (3.17 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 25-901261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 10' dry \/ 16' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 25-901261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25.4 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 34 gpm (135 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.125\" (3.17 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 10' dry \/ 16' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF25A pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF25A is rated up to 34 gpm (135 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF25A-PWR-FLO-1-INCH-OP-MANUAL-POLY-BOLTED-ARO-STYLE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF25A operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf25a-1-inch-25-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102498119992,"sku":"25-901261","price":1362.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF25A_7045be93-dec4-4635-b3c8-216d0a61fab6.jpg?v=1791498269"},{"product_id":"nomad-n15-1-1-2-inch-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Quali-Flo N15 1-1\/2\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN N15B1ABWANS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N15 (model N15B1ABWANS000) is a 1-1\/2\" (38 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 107 gpm (405 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 0.25\" (6 mm). This bolted standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N15B1ABWANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N15B1ABWANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" NPT \/ 1-1\/2\" BSP tapered (internal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 107 gpm (405 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.25\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.41 gal (1.55 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 60.4 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N15 is rated up to 107 gpm (405 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" NPT air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N15-Metallic-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-1-2-40-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102429634872,"sku":"N15B1ABWANS000","price":1302.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/QUALIFLO-1-5-INCH.jpg?v=1791498274"},{"product_id":"nomad-npf07-1-4-inch-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF07 1\/4\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 07-2661)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF07 (model 07-2661) is a 1\/4\" (6 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 4.4 gpm (16.7 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/32\" (0.7 mm). This clamped, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 07-2661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 6.2' dry \/ 30.6' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 07-2661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/4\" (6 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 4.4 gpm (16.7 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/32\" (0.7 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.01 gal (0.04 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 6.2' dry \/ 30.6' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 5.0\" x 6.8\" x 6.8\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF07 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF07 is rated up to 4.4 gpm (16.7 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/8\" (3 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (BSP); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF07-PWR-FLO-QUARTER-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF07 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf07-1-4-inch-6-4-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102432485688,"sku":"07-2661","price":578.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF07.jpg?v=1791498277"},{"product_id":"nomad-npf07-1-4-inch-non-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF07 1\/4\" Polypropylene Buna-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 07-2266)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF07 (model 07-2266) is a 1\/4\" (6 mm) polypropylene, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 4.8 gpm (18.1 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/64\" (0.4 mm). This clamped, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 07-2266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 10' dry \/ 29' wet (rubber-fitted)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 07-2266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/4\" (6 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 4.8 gpm (18.1 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/64\" (0.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 10' dry \/ 29' wet (rubber-fitted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF07 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF07 is rated up to 4.8 gpm (18.1 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/8\" (3 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF07-POLY-PWR-FLO-QUARTER-INCH-OP-MANUAL-CLAMPED-2021v6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF07 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf07-1-4-inch-6-4-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102402896184,"sku":"07-2266","price":456.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF07-POLY-CLAMPED.jpg?v=1791498280"},{"product_id":"nomad-n15-1-1-2-inch-non-metallic-ptfe-diaphragm-pump","title":"NOMAD Quali-Flo N15 1-1\/2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump (MPN N15B3PGPPAS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N15 (model N15B3PGPPAS000) is a 1-1\/2\" (38 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 100 gpm (378 lpm), runs on up to 100 psi (7 bar) of compressed air and passes solids up to 0.47\" (12 mm). This standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build N15B3PGPPAS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N15B3PGPPAS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" ANSI flange or PN10 40 mm DIN flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 100 gpm (378 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psi (7 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.47\" (12 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.43 gal (1.63 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 82 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N15 is rated up to 100 gpm (378 lpm) at a maximum 100 psi (7 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air; do not exceed 100 psi (7 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N15-Non-Metallic-Poly-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/1-1-2-38-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102427144504,"sku":"N15B3PGPPAS000","price":3131.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/N15-Non-Metallic_performance-chart-01_46b33497-1aa0-4e4f-9d7b-0c5266453d2d.jpg?v=1791498280"},{"product_id":"nomad-npf50-2-inch-non-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF50 2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 50-22611)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF50 (model 50-22611) is a 2\" (51 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 156 gpm (591 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This clamped, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 50-22611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 24.4' dry \/ 28.4' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-22611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 156 gpm (591 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.73 gal (2.8 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 24.4' dry \/ 28.4' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 13.1\" x 19.3\" x 30.3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 75 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF50 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF50 is rated up to 156 gpm (591 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF50-PWR-FLO-2-INCH-OP-MANUAL-POLY-CLAMPED.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf50-2-inch-51-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102624735544,"sku":"50-22611","price":4243.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF50-NON-METALLIC-CLAMPED.jpg?v=1791498311"},{"product_id":"nomad-npf50-flap-valve-2-inch-non-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF50 Flap Valve 2\" Conductive Polypropylene Neoprene-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 50-4263)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF50 Flap Valve (model 50-4263) is a 2\" (51 mm) conductive polypropylene, Neoprene-fitted air-operated double diaphragm (AODD) pump that runs on up to 125 psig (8.6 bar) of compressed air. This clamped, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003eConductive (carbon-filled) polypropylene wetted parts let the pump body be grounded, which is commonly required where static build-up must be controlled. Neoprene is a general-purpose rubber with good abrasion resistance, commonly used for water-based slurries and non-aggressive fluids. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you. Full performance data for this build is in the NOMAD operation manual linked below.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductive Polypropylene wetted parts, Neoprene diaphragms\u003c\/strong\u003e - standard NOMAD build 50-4263\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-4263\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Neoprene elastomers, per NOMAD):\u003c\/strong\u003e 0°F to 200°F (-17.8°C to 93.3°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Conductive Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Neoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Neoprene. Neoprene is a general-purpose rubber with good abrasion resistance, commonly used for water-based slurries and non-aggressive fluids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other port connections (BSP). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF50-PWR-FLO-2-INCH-OP-MANUAL-FLAP-VALVE.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF50 Flap Valve operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/2-51mm-non-metallic-rubber-fitted-air-operated-double-diaphragm-pump\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102660452664,"sku":"50-4263","price":3366.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF50-NON-METALLIC-FLAP-VALVE.jpg?v=1791498316"},{"product_id":"nomad-npf25-1-inch-side-ported-non-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF25 1\" Side-Ported Polypropylene Santoprene-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 25-12691)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF25 (model 25-12691) is a 1\" (25 mm) side-ported polypropylene, Santoprene-fitted air-operated double diaphragm (AODD) pump that moves up to 58 gpm (220 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 3\/16\" (4.76 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Santoprene diaphragms\u003c\/strong\u003e - standard NOMAD build 25-12691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 11.9' dry \/ 30' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 25-12691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25 mm), side-ported, flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 58 gpm (220 lpm) Santoprene-fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 3\/16\" (4.76 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.086 gal (0.32 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 11.9' dry \/ 30' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Santoprene elastomers, per NOMAD):\u003c\/strong\u003e -40°F to 225°F (-40°C to 107.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 22 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF25 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF25 is rated up to 58 gpm (220 lpm) Santoprene-fitted at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - ask Tank Supply Direct to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Santoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Santoprene. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Other elastomers offered for this pump include Neoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Conductive Polypropylene); port connections (ANSI Flange); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF25-1in-Poly-PWR-FLO-2024_Rev4.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF25 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf25-1-inch-25-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102571946296,"sku":"25-12691","price":1372.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF25-NON-METALLIC-SIDE-PORTED.jpg?v=1791498318"},{"product_id":"nomad-npf15-1-2-inch-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF15 1\/2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 15-1261)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF15 (model 15-1261) is a 1\/2\" (13 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 15.0 gpm (57 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/16\" (1.6 mm). This bolted, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 15-1261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 15-1261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" (13 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 15.0 gpm (57 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/16\" (1.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.027 gal (0.10 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 7.9\" x 9.2\" x 10.9\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 8 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF15 is rated up to 15.0 gpm (57 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other port connections (BSP). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF15-PWR-FLO-HALF-INCH-POLY-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf15-1-2-inch-13-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102437564728,"sku":"15-1261","price":924.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF15-POLY.jpg?v=1791498321"},{"product_id":"nomad-n20-2-inch-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Quali-Flo N20 2\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN N20B1ABBANS000)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Quali-Flo N20 (model N20B1ABBANS000) is a 2\" (51 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 151 gpm (571 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 0.25\" (6 mm). This bolted standard build is part of the NOMAD Quali-Flo line.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build N20B1ABBANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e N20B1ABBANS000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Quali-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" NPT (internal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 151 gpm (571 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 0.25\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.42 gal (1.59 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 70.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD N20 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD N20 is rated up to 151 gpm (571 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" NPT air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-N20-Metallic-Operation-Manual.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD N20 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/quali-flo\/2-51-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102429733176,"sku":"N20B1ABBANS000","price":1745.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/QUALIFLO-2-INCH.jpg?v=1791498321"},{"product_id":"nomad-npf07-1-4-inch-non-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF07 1\/4\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 07-2261)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF07 (model 07-2261) is a 1\/4\" (6 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 4.8 gpm (18.1 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/64\" (0.4 mm). This clamped, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 07-2261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 9' dry \/ 31' wet (PTFE-fitted)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 07-2261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/4\" (6 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/8\" (3 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 4.8 gpm (18.1 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/64\" (0.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 9' dry \/ 31' wet (PTFE-fitted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF07 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF07 is rated up to 4.8 gpm (18.1 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/8\" (3 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF07-POLY-PWR-FLO-QUARTER-INCH-OP-MANUAL-CLAMPED-2021v6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF07 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf07-1-4-inch-6-4-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102435467576,"sku":"07-2261","price":493.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF07-POLY-CLAMPED_0acea870-ee20-4e08-b272-5511c7a9f712.jpg?v=1791498642"},{"product_id":"nomad-npf15-1-2-inch-non-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF15 1\/2\" Polypropylene Buna-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 15-2266)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF15 (model 15-2266) is a 1\/2\" (13 mm) polypropylene, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 14.8 gpm (56 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/16\" (1.6 mm). This clamped, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 15-2266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 20' dry \/ 31' wet (rubber-fitted)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 15-2266\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" (13 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14.8 gpm (56 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/16\" (1.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 20' dry \/ 31' wet (rubber-fitted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 8.0\" x 8.2\" x 8.6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 9 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e PVDF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF15 is rated up to 14.8 gpm (56 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF15-PWR-FLO-HALF-INCH-OP-MANUAL-POLY-CLAMPED-2021v6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf15-1-2-inch-13-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102438318392,"sku":"15-2266","price":614.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF15-POLY-CLAMPED.jpg?v=1791498642"},{"product_id":"nomad-npf25-1-inch-side-ported-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF25 1\" Side-Ported Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 25-12611)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF25 (model 25-12611) is a 1\" (25 mm) side-ported polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 46 gpm (174 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 3\/16\" (4.76 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 25-12611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 7.9' dry \/ 31' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 25-12611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25 mm), side-ported, flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 46 gpm (174 lpm) reduced-stroke PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 3\/16\" (4.76 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.057 gal (0.22 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 7.9' dry \/ 31' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 22 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF25 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF25 is rated up to 46 gpm (174 lpm) reduced-stroke PTFE at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - ask Tank Supply Direct to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Conductive Polypropylene); port connections (ANSI Flange); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF25-1in-Poly-PWR-FLO-2024_Rev4.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF25 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf25-1-inch-25-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102530167096,"sku":"25-12611","price":1497.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF25-NON-METALLIC-SIDE-PORTED_b1669ceb-681d-464e-9499-0dcd4168f26d.jpg?v=1791498643"},{"product_id":"nomad-npf40-1-1-2-inch-non-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF40 1-1\/2\" Polypropylene Santoprene-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 40-22691-13)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF40 (model 40-22691-13) is a 1-1\/2\" (38 mm) polypropylene, Santoprene-fitted air-operated double diaphragm (AODD) pump that moves up to 92 gpm (348 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 3\/16\" (4.8 mm). This clamped, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Santoprene diaphragms\u003c\/strong\u003e - standard NOMAD build 40-22691-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 16' dry \/ 26' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 40-22691-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" (38 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 92 gpm (348 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 3\/16\" (4.8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.314 gal (1.19 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 16' dry \/ 26' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Santoprene elastomers, per NOMAD):\u003c\/strong\u003e -40°F to 225°F (-40°C to 107.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 11.2\" x 15.5\" x 20.8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 37 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF40 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF40 is rated up to 92 gpm (348 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Santoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Santoprene. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Other elastomers offered for this pump include EPDM, Hytrel, Neoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF40-1-HALF-INCH-POLY-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF40 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf40-1-1-2-inch-38-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102480654648,"sku":"40-22691-13","price":2420.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF40-POLY.jpg?v=1791498643"},{"product_id":"nomad-npf50-2-inch-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF50 2\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 50-1661-1)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF50 (model 50-1661-1) is a 2\" (51 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you. Full performance data for this build is in the NOMAD operation manual linked below.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 50-1661-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-1661-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 12.8\" x 17.3\" x 29.9\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 75 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF50-PWR-FLO-2-INCH-BOLTED-OP-MANUAL-2021v3.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf50-2-inch-51-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102577615160,"sku":"50-1661-1","price":2705.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF50-METALLIC-BOLTED.jpg?v=1791498643"},{"product_id":"nomad-npf15-1-2-inch-non-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF15 1\/2\" Polypropylene Santoprene-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 15-1269)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF15 (model 15-1269) is a 1\/2\" (13 mm) polypropylene, Santoprene-fitted air-operated double diaphragm (AODD) pump that moves up to 14.8 gpm (56 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/16\" (1.6 mm). This bolted, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Santoprene diaphragms\u003c\/strong\u003e - standard NOMAD build 15-1269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 15-1269\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" (13 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14.8 gpm (56 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/16\" (1.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.027 gal (0.101 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Santoprene elastomers, per NOMAD):\u003c\/strong\u003e -40°F to 225°F (-40°C to 107.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 7.9\" x 9.2\" x 10.9\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 8 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF15 is rated up to 14.8 gpm (56 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Santoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Santoprene. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Other elastomers offered for this pump include Hytrel, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other port connections (BSP). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF15-PWR-FLO-HALF-INCH-POLY-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf15-1-2-inch-13-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102434353464,"sku":"15-1269","price":687.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF15-POLY_421a7ec7-38a7-466c-87a5-da934e32b773.jpg?v=1791498643"},{"product_id":"nomad-npf15-1-2-inch-non-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF15 1\/2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 15-2261)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF15 (model 15-2261) is a 1\/2\" (13 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 14.1 gpm (53.4 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/16\" (1.6 mm). This clamped, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 15-2261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 17' dry \/ 32' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 15-2261\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" (13 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14.1 gpm (53.4 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/16\" (1.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 17' dry \/ 32' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 8.0\" x 8.2\" x 8.6\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 9 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e PVDF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF15 is rated up to 14.1 gpm (53.4 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF15-PWR-FLO-HALF-INCH-OP-MANUAL-POLY-CLAMPED-2021v6.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf15-1-2-inch-13-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102440186168,"sku":"15-2261","price":892.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF15-POLY-CLAMPED_fddaf727-d2b0-441a-95d6-d167fe003fdb.jpg?v=1791498682"},{"product_id":"nomad-npf80w-3-inch-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF80W 3\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 80-120061-1)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF80W (model 80-120061-1) is a 3\" (76 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 207 gpm (784 lpm), runs on up to 100 psig (6.9 bar) of compressed air and passes solids up to 1\/2\" (13 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 80-120061-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 12' dry \/ 28' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 80-120061-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 3\" (76 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" (19 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 207 gpm (784 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psig (6.9 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.99 gal (3.75 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 12' dry \/ 28' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 305 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF80W pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF80W is rated up to 207 gpm (784 lpm) at a maximum 100 psig (6.9 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" (19 mm) air inlet; do not exceed 100 psig (6.9 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF80W-PWR-FLO-3-INCH-POLY-OP-MANUAL-1-2-1-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF80W operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf80w-3-inch-76-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102731362616,"sku":"80-120061-1","price":10406.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF80W.jpg?v=1791498687"},{"product_id":"nomad-npf40-1-1-2-inch-non-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF40 1-1\/2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 40-22611)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF40 (model 40-22611) is a 1-1\/2\" (38 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 69 gpm (261 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 3\/16\" (4.8 mm). This clamped, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 40-22611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 40-22611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" (38 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 69 gpm (261 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 3\/16\" (4.8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.139 gal (0.53 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 11.2\" x 15.5\" x 20.8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 37 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF40 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF40 is rated up to 69 gpm (261 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF40-1-HALF-INCH-POLY-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF40 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf40-1-1-2-inch-38-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102604714296,"sku":"40-22611","price":2520.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF40-POLY_8108f62e-19d2-438c-91f7-0f08e8fa0ede.jpg?v=1791498698"},{"product_id":"nomad-npf40-1-1-2-inch-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF40 1-1\/2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 40-12611)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF40 (model 40-12611) is a 1-1\/2\" (38 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 84 gpm (318 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This bolted, ANSI flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 40-12611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX-designated build\u003c\/strong\u003e (model suffix X) for potentially explosive atmospheres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 40-12611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" (38 mm), ANSI flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 84 gpm (318 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.155 gal (0.59 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 11.8\" x 18.8\" x 26.3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 41 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF40 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF40 is rated up to 84 gpm (318 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Conductive Polypropylene). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF40-1_5-Poly-PWR-FLO_Rev0922_1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF40 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf40-1-1-2-inch-38-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102506836280,"sku":"40-12611","price":2730.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF40-POLY-BOLTED.jpg?v=1791498704"},{"product_id":"nomad-npf40-1-1-2-inch-non-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF40 1-1\/2\" Polypropylene Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 40-12661)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF40 (model 40-12661) is a 1-1\/2\" (38 mm) polypropylene, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 120 gpm (454 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This bolted, ANSI flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 40-12661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX-designated build\u003c\/strong\u003e (model suffix X) for potentially explosive atmospheres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 40-12661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" (38 mm), ANSI flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 120 gpm (454 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.330 gal (1.25 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 11.8\" x 18.8\" x 26.3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 41 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF40 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF40 is rated up to 120 gpm (454 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Hytrel, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Conductive Polypropylene). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF40-PWR-FLO-1-HALF-INCH-OP-MANUAL-POLY-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF40 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf40-1-1-2-inch-38-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102550712632,"sku":"40-12661","price":2239.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF40-POLY-BOLTED_fb22ad07-f38d-4923-98fd-e10fab4a6b8a.jpg?v=1791498706"},{"product_id":"nomad-npf80-3-inch-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF80 3\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 80-1661)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF80 (model 80-1661) is a 3\" (76 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 246 gpm (931 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 3\/8\" (9.5 mm). This bolted, ANSI flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 80-1661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 80-1661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 3\" (76 mm), ANSI flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 246 gpm (931 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 3\/8\" (9.5 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 16.5\" x 21.3\" x 35.1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 154 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF80 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF80 is rated up to 246 gpm (931 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (Flanged); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF80-3-IN-METALLIC-PWR-FLO-BOLTED_Rev0323-2.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF80 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf80-3-inch-76-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102767407416,"sku":"80-1661","price":5675.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF80-METALLIC-BOLTED.jpg?v=1791498707"},{"product_id":"nomad-npf50-2-inch-non-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF50 2\" Polypropylene Neoprene-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 50-22631)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF50 (model 50-22631) is a 2\" (51 mm) polypropylene, Neoprene-fitted air-operated double diaphragm (AODD) pump that moves up to 148 gpm (562 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This clamped, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Neoprene is a general-purpose rubber with good abrasion resistance, commonly used for water-based slurries and non-aggressive fluids. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Neoprene diaphragms\u003c\/strong\u003e - standard NOMAD build 50-22631\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 21' dry \/ 28.4' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-22631\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 148 gpm (562 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.69 gal (2.6 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 21' dry \/ 28.4' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Neoprene elastomers, per NOMAD):\u003c\/strong\u003e 0°F to 200°F (-17.8°C to 93.3°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 13.1\" x 19.3\" x 30.3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 75 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Neoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF50 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF50 is rated up to 148 gpm (562 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Neoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Neoprene. Neoprene is a general-purpose rubber with good abrasion resistance, commonly used for water-based slurries and non-aggressive fluids. Other elastomers offered for this pump include EPDM, Hytrel, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF50-PWR-FLO-2-INCH-OP-MANUAL-POLY-CLAMPED.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf50-2-inch-51-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102681751864,"sku":"50-22631","price":4041.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF50-NON-METALLIC-CLAMPED_605794bf-8d70-4bfd-a5a5-feb19c50f904.jpg?v=1791498744"},{"product_id":"nomad-npf80w-3-inch-non-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF80W 3\" Polypropylene Santoprene-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 80-120082-1)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF80W (model 80-120082-1) is a 3\" (76 mm) polypropylene, Santoprene-fitted air-operated double diaphragm (AODD) pump that moves up to 207 gpm (784 lpm), runs on up to 100 psig (6.9 bar) of compressed air and passes solids up to 1\/2\" (13 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Santoprene diaphragms\u003c\/strong\u003e - standard NOMAD build 80-120082-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 12' dry \/ 28' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 80-120082-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 3\" (76 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" (19 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 207 gpm (784 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 100 psig (6.9 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.99 gal (3.75 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 12' dry \/ 28' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Santoprene elastomers, per NOMAD):\u003c\/strong\u003e -40°F to 225°F (-40°C to 107.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 305 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Santoprene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF80W pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF80W is rated up to 207 gpm (784 lpm) at a maximum 100 psig (6.9 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - ask Tank Supply Direct to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Santoprene-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms are Santoprene. Santoprene is a thermoplastic elastomer (TPE) with good flex life and abrasion resistance, commonly used with water, mild acids and caustics. Other elastomers offered for this pump include Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" (19 mm) air inlet; do not exceed 100 psig (6.9 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF80W-PWR-FLO-3-INCH-POLY-OP-MANUAL-1-2-1-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF80W operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf80w-3-inch-76-mm-non-metallic-rubber-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102686994744,"sku":"80-120082-1","price":10369.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF80W_60dab816-f09a-4bd3-ac6d-8436b07204e4.jpg?v=1791498750"},{"product_id":"nomad-ntg15-1-2-inch-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Trans-Flo Gold NTG15 1\/2\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 15-2691)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo Gold NTG15 (model 15-2691) is a 1\/2\" (13 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 14 gpm (53 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/16\" (1.6 mm). This clamped, NPT-ported standard build is a Trans-Flo Gold pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 15-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 15-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" (13 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14 gpm (53 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/16\" (1.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 7.0\" x 8.2\" x 8.8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 13 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NTG15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NTG15 is rated up to 14 gpm (53 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (BSP, Tri-Clamp). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NTG15-TRANS-FLO-HALF-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NTG15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/ntg15-1-2-inch-13-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102411252024,"sku":"15-2691","price":830.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NTG15.jpg?v=1791498764"},{"product_id":"nomad-npf50-2-inch-non-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF50 2\" Polypropylene PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 50-12611)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF50 (model 50-12611) is a 2\" (51 mm) polypropylene, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 133 gpm (504 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 50-12611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-12611\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 133 gpm (504 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.457 gal (1.73 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 13.9\" x 23.8\" x 31.7\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 70 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF50 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF50 is rated up to 133 gpm (504 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Conductive Polypropylene); port connections (ANSI Flange); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF50-2in-Poly-PWR-FLO-bolted-2024-with-conductive-poly-and-center-ported.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf50-2-inch-51-mm-non-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102697709880,"sku":"50-12611","price":3678.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF50-NON-METALLIC.jpg?v=1791498775"},{"product_id":"nomad-ntg80-3-inch-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Trans-Flo Gold NTG80 3\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 80-2691)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo Gold NTG80 (model 80-2691) is a 3\" (76 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 186 gpm (704 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 3\/8\" (10 mm). This clamped, NPT-ported standard build is a Trans-Flo Gold pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 80-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX-designated build\u003c\/strong\u003e (model suffix X) for potentially explosive atmospheres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 80-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 3\" (76 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" (19 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 186 gpm (704 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 3\/8\" (10 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 11.0\" x 17.0\" x 31.9\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 116 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NTG80 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NTG80 is rated up to 186 gpm (704 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" (19 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Ductile Iron, Stainless Steel); port connections (BSP, Tri-Clamp). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NTG80-TRANS-FLO-3-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NTG80 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/ntg80-3-inch-76-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102417084728,"sku":"80-2691","price":4290.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NTG80.jpg?v=1791498811"},{"product_id":"nomad-ntg15-1-2-inch-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Trans-Flo Gold NTG15 1\/2\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 15-2696)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo Gold NTG15 (model 15-2696) is a 1\/2\" (13 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 14.5 gpm (54.9 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/16\" (1.6 mm). This clamped, NPT-ported standard build is a Trans-Flo Gold pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 15-2696\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 15-2696\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" (13 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14.5 gpm (54.9 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/16\" (1.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 7.0\" x 8.2\" x 8.8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 13 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NTG15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NTG15 is rated up to 14.5 gpm (54.9 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Hytrel, Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (BSP). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NTG15-TRANS-FLO-HALF-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NTG15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/ntg15-1-2-inch-13-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102407582008,"sku":"15-2696","price":622.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NTG15_89deb1a1-6e7e-4308-8426-2e535eee8870.jpg?v=1791498831"},{"product_id":"nomad-npf50-2-inch-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF50 2\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 50-1666-1)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF50 (model 50-1666-1) is a 2\" (51 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 158 gpm (597 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 50-1666-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 22.7' dry \/ 28.4' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-1666-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 158 gpm (597 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.73 gal (2.8 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 22.7' dry \/ 28.4' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 12.8\" x 17.3\" x 29.9\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 75 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF50 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF50 is rated up to 158 gpm (597 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Hytrel, Neoprene, Polyurethane, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF50-PWR-FLO-2-INCH-BOLTED-OP-MANUAL-2021v3.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf50-2-inch-51-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102667891000,"sku":"50-1666-1","price":2226.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF50-METALLIC-BOLTED_d056fadc-bca9-42e2-99ec-f1d7d4d624b4.jpg?v=1791498851"},{"product_id":"nomad-ntg25-1-inch-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Trans-Flo Gold NTG25 1\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 25-2696)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo Gold NTG25 (model 25-2696) is a 1\" (25 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 35 gpm (132 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/8\" (3.2 mm). This bolted, NPT-ported standard build is a Trans-Flo Gold pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 25-2696\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 17' dry \/ 31' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 25-2696\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25 mm) inlet \/ 3\/4\" (19 mm) outlet, NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 35 gpm (132 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/8\" (3.2 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.105 gal (0.41 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 17' dry \/ 31' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 7.3\" x 10.5\" x 11.0\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 26 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NTG25 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NTG25 is rated up to 35 gpm (132 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Hytrel, Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (BSP, Tri-Clamp); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NTG25-TRANS-FLO-1-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NTG25 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/ntg25-1-inch-25-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102408040760,"sku":"25-2696","price":852.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NTG25.jpg?v=1791498930"},{"product_id":"nomad-ntg40-1-1-2-inch-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Trans-Flo Gold NTG40 1-1\/2\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 40-2691)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo Gold NTG40 (model 40-2691) is a 1-1\/2\" (38 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 62 gpm (235 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 3\/16\" (4.8 mm). This clamped, NPT-ported standard build is a Trans-Flo Gold pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 40-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 40-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1-1\/2\" (38 mm) inlet \/ 1-1\/4\" (32 mm) outlet, NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 62 gpm (235 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 3\/16\" (4.8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 11.2\" x 15.4\" x 17.4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 38 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NTG40 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NTG40 is rated up to 62 gpm (235 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Ductile Iron, Stainless Steel); port connections (BSP, Tri-Clamp); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NTG40-TRANS-FLO-1-HALF-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NTG40 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/ntg40-1-1-2-inch-38-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102414397752,"sku":"40-2691","price":1665.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NTG40.jpg?v=1791498937"},{"product_id":"nomad-npf50-2-inch-non-metallic-rubber-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF50 2\" Polypropylene Buna-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 50-12661)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF50 (model 50-12661) is a 2\" (51 mm) polypropylene, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 165 gpm (624 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This bolted, flanged-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003ePolypropylene wetted parts give a corrosion-resistant, non-metallic pump that is commonly chosen for many acids, caustics, water-treatment and wastewater chemicals; polypropylene is generally not used for most solvents and fuels. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 50-12661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-12661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), flanged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/2\" (13 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 165 gpm (624 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.727 gal (2.75 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 13.9\" x 23.8\" x 31.7\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 70 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF50 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF50 is rated up to 165 gpm (624 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Hytrel, Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/2\" (13 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Conductive Polypropylene); port connections (ANSI Flange); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF50-2in-Poly-PWR-FLO-bolted-2024-with-conductive-poly-and-center-ported.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf50-2-inch-51-mm-non-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102613856568,"sku":"50-12661","price":3351.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF50-NON-METALLIC_07a1b7a5-6061-4f1a-a8bc-9d54e86a12b4.jpg?v=1791498971"},{"product_id":"nomad-npf25-1-inch-metallic-ptfe-diaphragm-pump-bolted","title":"NOMAD Pwr-Flo NPF25 1\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Bolted (MPN 25-1661)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF25 (model 25-1661) is a 1\" (25 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 45 gpm (170 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/8\" (3.2 mm). This bolted, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 25-1661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolted construction\u003c\/strong\u003e - fastened manifolds for a positive seal on leak-sensitive fluids\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 25-1661\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\" (25 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 45 gpm (170 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/8\" (3.2 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.091 gal (0.34 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 7.9\" x 10.5\" x 11.0\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 26 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Bolted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF25 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF25 is rated up to 45 gpm (170 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (BSP, Tri-Clamp); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF25-PWR-FLO-1-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF25 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf25-1-inch-25-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-bolted\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102461354296,"sku":"25-1661","price":1214.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF25-METALLIC.jpg?v=1791498971"},{"product_id":"nomad-npf15-1-2-inch-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Pwr-Flo NPF15 1\/2\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 15-2666)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Pwr-Flo NPF15 (model 15-2666) is a 1\/2\" (13 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 14.8 gpm (56 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/16\" (1.6 mm). This clamped, NPT-ported standard build is a Pwr-Flo pump built for indoor plant service on clean, filtered air, with an anti-stall ASD air valve for on\/off filling and batching.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAsymmetrical spool design (ASD) air valve\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnti-stall design for reliable on\/off filling and batching\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAir-efficient operation on clean, filtered air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 15-2666\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 15-2666\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Pwr-Flo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 1\/2\" (13 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\" (6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 14.8 gpm (56 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/16\" (1.6 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.027 gal (0.101 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 7.9\" x 9.2\" x 10.9\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 13 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Pwr-Flo for indoor plant and factory service on clean, filtered air. Its ASD air valve is the more air-efficient design and gives reliable on\/off starts for filling and batching.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NPF15 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NPF15 is rated up to 14.8 gpm (56 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Hytrel, Neoprene, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 1\/4\" (6 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (BSP, Tri-Clamp); ATEX versions. This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NPF15-PWR-FLO-HALF-INCH-OP-MANUAL-2021v2.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NPF15 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/pwr-flo\/npf15-1-2-inch-13-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102435565880,"sku":"15-2666","price":668.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NPF15-METALLIC.jpg?v=1791498999"},{"product_id":"nomad-ntg50-2-inch-metallic-rubber-diaphragm-pump-clamped","title":"NOMAD Trans-Flo Gold NTG50 2\" Aluminum Buna-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 50-2696-2)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo Gold NTG50 (model 50-2696-2) is a 2\" (51 mm) aluminum, Buna-fitted air-operated double diaphragm (AODD) pump that moves up to 163 gpm (617 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This clamped, NPT-ported standard build is a Trans-Flo Gold pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, Buna diaphragms\u003c\/strong\u003e - standard NOMAD build 50-2696-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX-designated build\u003c\/strong\u003e (model suffix X) for potentially explosive atmospheres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 21' dry \/ 31' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-2696-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" (19 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 163 gpm (617 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.71 gal (2.69 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 21' dry \/ 31' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (Buna-N elastomers, per NOMAD):\u003c\/strong\u003e 10°F to 180°F (-12.2°C to 82.2°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 13.5\" x 15.9\" x 26.3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 72 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Buna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NTG50 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NTG50 is rated up to 163 gpm (617 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"Buna-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are Buna. Buna-N (nitrile) is a general-purpose rubber commonly used with petroleum oils, fuels, hydraulic fluid and water. Other elastomers offered for this pump include EPDM, Hytrel, Neoprene, Polyurethane, Santoprene, Viton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" (19 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Ductile Iron, Stainless Steel); port connections (BSP, Tri-Clamp). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NTG50-TRANS-FLO-2-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NTG50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/ntg50-2-inch-51-mm-metallic-rubber-tpe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102411317560,"sku":"50-2696-2","price":1624.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NTG50.jpg?v=1791499007"},{"product_id":"nomad-ntg50-2-inch-metallic-ptfe-diaphragm-pump-clamped","title":"NOMAD Trans-Flo Gold NTG50 2\" Aluminum PTFE-Fitted Air-Operated Double Diaphragm Pump, Clamped (MPN 50-2691)","description":"\u003ch6\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eThe NOMAD Trans-Flo Gold NTG50 (model 50-2691) is a 2\" (51 mm) aluminum, PTFE-fitted air-operated double diaphragm (AODD) pump that moves up to 141 gpm (534 lpm), runs on up to 125 psig (8.6 bar) of compressed air and passes solids up to 1\/4\" (6.4 mm). This clamped, NPT-ported standard build is a Trans-Flo Gold pump built for rugged outdoor duty and lower-quality air.\u003c\/p\u003e\u003cp\u003eAluminum wetted parts give a lightweight, durable metallic pump that is commonly chosen for oils, fuels, lubricants, paints and many water-based fluids; aluminum is generally not used for strong acids or caustics. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm. Always confirm chemical compatibility with your fluid before ordering - Tank Supply Direct can check it for you.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAnodized aluminum piston-style air valve system\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt for mining, construction, marine and utility work\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTolerates lower-quality, unfiltered plant or compressor air\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum wetted parts, PTFE diaphragms\u003c\/strong\u003e - standard NOMAD build 50-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamped construction\u003c\/strong\u003e - quick teardown for diaphragm and check-valve service\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATEX-designated build\u003c\/strong\u003e (model suffix X) for potentially explosive atmospheres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir-operated, no electric motor\u003c\/strong\u003e - flow adjusts with the air supply; no motor or controls at the pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e - suction lift 12' dry \/ 31' wet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ MPN:\u003c\/strong\u003e 50-2691\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e NOMAD Trans-Flo Gold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid inlet\/outlet:\u003c\/strong\u003e 2\" (51 mm), NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 3\/4\" (19 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum flow rate:\u003c\/strong\u003e 141 gpm (534 lpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum air supply pressure:\u003c\/strong\u003e 125 psig (8.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum solids passage:\u003c\/strong\u003e 1\/4\" (6.4 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplacement per stroke:\u003c\/strong\u003e 0.40 gal (1.51 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction lift:\u003c\/strong\u003e 12' dry \/ 31' wet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range (PTFE elastomers, per NOMAD):\u003c\/strong\u003e 40°F to 220°F (4.4°C to 104.4°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (D x W x H):\u003c\/strong\u003e 13.5\" x 15.9\" x 26.3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per NOMAD manual):\u003c\/strong\u003e 72 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWetted body \/ manifolds:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir chambers:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter section:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir valve:\u003c\/strong\u003e Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiaphragms:\u003c\/strong\u003e PTFE (Neoprene back-up)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck balls:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeats:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-rings:\u003c\/strong\u003e PTFE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly:\u003c\/strong\u003e Clamped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e NOMAD pumps by JDA Global\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003eNOMAD lists these industries for this pump: Automotive, Ceramics, Chemical, electronics\/semiconductor, Food\/Beverage, Mining\/Construction, Petroleum, Pharmaceutical, Wastewater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePwr-Flo or Trans-Flo?\u003c\/strong\u003e NOMAD positions Trans-Flo for rugged outdoor work such as mining, marine and construction. It tolerates lower-quality, unfiltered compressed air and is the simpler series to maintain in the field.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eCommon Questions\u003c\/strong\u003e\u003c\/h6\u003e\u003cp\u003e\u003cstrong\u003eHow many gallons per minute does the NOMAD NTG50 pump?\u003c\/strong\u003e\u003cbr\u003eThe NOMAD NTG50 is rated up to 141 gpm (534 lpm) at a maximum 125 psig (8.6 bar) air supply. Actual flow drops with discharge pressure, suction lift and fluid viscosity - use the NOMAD performance curve in the product images to size it for your duty point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does \"PTFE-fitted\" mean, and when should I choose a different material?\u003c\/strong\u003e\u003cbr\u003eThe diaphragms and check balls are PTFE. PTFE has the broadest chemical resistance of the standard diaphragm materials and is the usual choice for aggressive chemicals and solvents; on this build the PTFE diaphragm is backed by a Neoprene diaphragm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat air supply does it need?\u003c\/strong\u003e\u003cbr\u003eConnect clean, dry compressed air to the 3\/4\" (19 mm) air inlet; do not exceed 125 psig (8.6 bar). Flow and discharge pressure rise and fall with the air pressure you supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this pump available in other configurations?\u003c\/strong\u003e\u003cbr\u003eYes. NOMAD also builds this model with other wetted materials (Stainless Steel); port connections (BSP, Tri-Clamp). This listing is the standard build; call or email Tank Supply Direct for a quote on any other configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow fast does it ship?\u003c\/strong\u003e\u003cbr\u003eThe standard build ships from Nevada in approximately 4 days. Shipping is calculated at checkout.\u003c\/p\u003e\u003ch6\u003e\u003cstrong\u003eManufacturer Documents\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/wp-content\/uploads\/NOMAD-NTG50-TRANS-FLO-2-INCH-OP-MANUAL.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD NTG50 operation manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.jdaglobal.com\/nomad-diaphragm-pumps\/trans-flo\/ntg50-2-inch-51-mm-metallic-ptfe-fitted-air-operated-double-diaphragm-pump-clamped\/\" target=\"_blank\" rel=\"noopener\"\u003eNOMAD product page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003e\u003cstrong\u003eShipping and Warranty\u003c\/strong\u003e\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture Lead Time:\u003c\/strong\u003e Approximately 4 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips From (State):\u003c\/strong\u003e NV\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eProducts are subject to \u003cb\u003efreight or parcel shipping costs\u003c\/b\u003e. Shipping charges are \u003cb\u003ecalculated at checkout\u003c\/b\u003e based on delivery location, product size, weight, and carrier requirements.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarranty Information\u003c\/b\u003e\u003cbr\u003eWarranty coverage varies by manufacturer and product type. For warranty details or to initiate a warranty claim, please contact \u003cb\u003eTank Supply Direct\u003c\/b\u003e at \u003cb\u003einfo@tanksupplydirect.com\u003c\/b\u003e.\u003c\/p\u003e","brand":"NOMAD","offers":[{"title":"Default Title","offer_id":53102414004536,"sku":"50-2691","price":2313.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0916\/1732\/9464\/files\/NTG50_7cec84cd-b2f2-47f2-9038-805c15544b45.jpg?v=1791499093"}],"url":"https:\/\/www.tanksupplydirect.com\/collections\/air-operated-double-diaphragm-pumps.oembed","provider":"Tank Supply Direct","version":"1.0","type":"link"}